Mobile loaders
Serie 61
Identification – VLC
Type of construction – transportation pneumatic / screw
CHARACTERISTICS AND APPLICATION:
Mobile loader VLC is intended for fluent dust-free loading of bulk cement into tank-trucks or waggons with filling socket DM 350 – 550 mm. It travels on a railway placed on the floor in cement dispatch building above lorries or waggons passage corridor. The loader is controlled by hand-operating driver from service platform.
DIMENSIONS AND PARAMETERS:
Type range of mobile loaders is devided in two basic groups pursuant to transport kind of material:
- pneumatic transport by means of air fluid slides
- screw conveyor transport
Mobile loaders are designed standardly for wheel spacing 1200mm and travel length from 6000 up to 12000mm. In the event of a specific requirement it can be designed a mobile loader for special conditions.
Delivered machines are equipped with pneumatic and elecric elements from prestigious suppliers acc. to recommendation of producer, alternatively acc. to wish of customer.
DESCRIPTION OF CONSTRUCTION:
Mobile loader consists of following assembly groups:
Inlet body – inlet head is welded from plate with material inlet socket,
circular flange for connecting of exhausting piping and sealing fabric with
two transfering rolls.
Supporting structure – welded of steel profiles, with adjusting screw and
anchoring into concrete floor incl. supports and travelling cable trailing.
Travelling body – three parts casing welded of plate, reinforced by ribs,
bolted together by means of two flanges, with bottom adapted for mounting
of air fluid slides (slide chutes) or screw conveyors, equipped on upper edge
with bar grate with rectification bolts and covering fabric.
Drive axle – of mobil loader travel with drive, through shaft, carrying covers
and travel elimination.
Free axle (non driven) – of mobil loader travel with carrying covers and
separate travelling wheels.
Loading chute – complete one or three ropes loading chute PH for fluent
dust-free loading of bulk cement into tank-trucks with socket diameter 550mm – the loading chute need not to be included in delivery scope.
Electrical installation – of mobile loader with loading chute including
stationary and travelling terminal box with cable and cable trailing, power
and controlling terminal box of loading chute and el. installation (intercon-
nection) of both parts.
Construction – the loding chute is welded, made from plates and profiles of normal steel (class 11 acc. CZ-Standard ČSN), the parts, which are in contact with transported material, can be made from the steel Brinar 400Cr (abrasion-resistant).
A special type of construction and special requirements must be consulted with supplier !!!
Photos
Files to download
