Mail Print

Roll flow control gates, pneumatic

Serie 57

Identification – VRPP
Type of construction – pneumatic, welded

CHARACTERISTICS AND APPLICATION:

Roll flow control gates, pneumatic with pneumatic drive (further only VRPP) serves for material flow regulating and closing in technological lines. It is determined for material temperature up to 120°C. Flow quantity is regulated with turning of inside roll, which is operated by means of a pneumatic drive. The equipment is designed for milled powdered materials and it is dustproof.

DIMENSIONS AND PARAMETERS:

Type range of roll flow control gates is designed in 8 basic sizes <from 150x150 up to 650x650 mm > (see tablet on data sheet). Grain size of material and required capacity in relation to clear area acc. to tablet is main criterion for application in transport way (0 – 5 mm, sporadic graines max. 10 mm). Distance control is ensured by means of leverage of pneumatic drive.
Delivered VRPM is equipped with drive elements from prestigious suppliers acc. to recommendation of producer, alternatively acc. to wish of customer.

DESCRIPTION OF CONSTRUCTION:

Roll flow control gate has rectangular inlet and outlet flange. It has a split casing (body) welded from steel, between separate parts there are inserted felt sealings of inside regulating roll. This roll is fixed with shaft into casing through friction bearings. The shaft is sealed against unwanted product spillover. Drive of VRPM is done by means of pneumatic driver with leverage, which is bolted on a console of the body.

Construction – casing (body) of VRPP is welded and is made from a normal steel St-37 (class 11 acc. CZ-Standard ČSN), the transported product touching parts are made from steel St-52 (class 11 acc. CZ-Standard ČSN). Inside roll is made from steel St-52 and it is fixed with shaft into self-lubricating sleeves on outside covers. The inside roll, shaft support and outside covers are equipped with sealings to prevent dustiness.

A special type of construction and special requirements must be consulted with supplier !!!

Photos

 

Files to download

Co děláme?

Dodávky dopravního zařízení a kompletů

jako jsou např. pásové dopravníky, korečkové elevátory, šnekové dopravníky, skříňové a pásové podavače, turniketové podavače, šoupátkové uzávěry, uzavírací klapky, míchače a elementy pro pneudopravu.

Řešení technologických procesů úpravy nerostných surovin

a výroby stavebního kameniva s následným zpracováním realizační dokumentace a ucelenými dodávkami výrobních uzlů a provozních souborů.

Dále můžeme vyrábět a dodávat

Ocelové konstrukce (pouze části, které kompletují námi dodávané stroje, tzn. vstupní a výstupní části, obslužné plošiny), sila, zásobníky, skluzy atd.

CONTACT FORM