Roll flow control gates, motor
Serie 56
Identification – VRPM
Type of construction – motor, welded
CHARACTERISTICS AND APPLICATION:
Roll flow control gate with motor drive (further only VRPM) serves for material flow regulating and closing in technological lines. It is determined for material temperature up to 120°C. Flow quantity is regulated with turning of inside roll, which is operated by means of a geared motor. The equipment is designed for milled powdered materials and it is dustproof.
DIMENSIONS AND PARAMETERS:
Type range of roll flow control gates is designed in 8 basic sizes <from 150x150 up to 650x650 mm > (see tablet on data sheet). Grain size of material and required capacity in relation to clear area acc. to tablet is main criterion for application in transport way (0 – 5 mm, sporadic graines max. 10 mm). Distance control is ensured by means of leverage of geared motor.
Delivered VRPM is equipped with drive elements from prestigious suppliers acc. to recommendation of producer, alternatively acc. to wish of customer.
DESCRIPTION OF CONSTRUCTION:
Roll flow control gate has rectangular inlet and outlet flange. It has a split casing (body) from steel, between separate parts there are inserted felt sealings of inside regulating roll. This roll is fixed with shaft into casing through friction bearings. The shaft is sealed against unwanted product spillover. Drive of VRPM is done by means of geared motor with leverage, which is bolted on the body.
Construction – casing (body) of VRPM is welded and is made from a normal steel St-37 (class 11 acc. CZ-Standard ČSN), the transported product touching parts are made from steel St-52 (class 11 acc. CZ-Standard ČSN). Inside roll is made from steel St-52 and it is fixed with shaft into self-lubricating sleeves on outside covers. The inside roll, shaft support and outside covers are equipped with sealings to prevent dustiness.
A special type of construction and special requirements must be consulted with supplier !!!
Fotogalerie
Files to download
